INSTRUCTIONS

Proper operation and maintenance of your professional lighted make up station will insure lasting operation for many years.  If for some reason a light or ballast goes out within our warrantee period it will be replaced free of charge.  Warrantee does not cover improper use of professional portable lighted make up station.

Setting Up: Place the Portable Lighted Make up Station on a table or other suitable surface with the back brace facing to the back.  Extend the back brace away from the case a few inches for support before the lid is removed.

Opening:  Placing your index finger under the tail of one of the latches, pull upward on the tail to open the latch.  All four latches are opened the same manner.  Remove lid.  An extension cord is stored in the lid.  You should remove the extension cord at this time.

Power:  First, plug one end of the extension cord into the side of the station.  Then plug the other end into a properly grounded 120 Volt power source.  Make sure the cord is firmly seated.

Light Switches:  The two switches are independent of each other and can be turned on separately or at the same time.

Power Outlets:  The power outlets are not switched.  Power is always on to them once the lighted makeup station is plugged in.

Shipping:  Your make up station was designed to be transported in a car or a van.  Never ship (FEDEX, UPS, Delta, etc.) the makeup station without placing it in a protective box.  This will ensure that the tubes and mirror will arrive safely at your destination.

For additional information on Maintenance please see our Maintenance Instructions.